Codigo de area de new jersey
Link to what most Americans are likely to believe, area codes exist outside of the US. There are area codes in the world: in the US, 42 in Canada, 17 non-geographic, and 20 others. Most of the aea area codes are in the Source. California is the state with the most area codes at 34 followed by Texas 27New York 19Florida 17 codigk, and Illinois While no area codes in the US cross state boundaries, 3 area codes in Canada cross province boundaries.
State of New Jersey. Area code was the area code assigned to the entire check this out of New Jersey inwhen the North American area code system was formulated. After splits inandit covers the northeasternmost portion of the state, including most of Hudson and Bergen counties, bordering the Hudson River and New York City. Area code is an overlay code to the same numbering plan area that was installed in Area code jeersey covered the entire state of New Jersey, [2] [1] despite the state's dense population. The bulk of New Jersey's population is concentrated in the large metropolitan suburbs of New York City in the northeast and the suburbs of Philadelphia in the southwest.
New Jersey area codes - Map, list, and phone lookup
NANPA organizes the allocation of area codes and telephone prefixes to various phone companies. NPA : Area codes came into use during the early s. NPA codes are more commonly referred to as area codes. While the system was developed in the 40s, direct dialing of long distance did not begin until the early 50s. Some area codes are reserved for special purposes. For instance, area code commonly referred to as numbers is reserved for toll free calls where the called party is charged instead of the calling party.
Also, not all area codes are currently in use. The NXX is also known as the prefix or exchange. Various telephone carriers will reserve blocks of telephone numbers by reserving an NXX within an area code. Like area codes, not all prefixes are currently in use. Subscriber : Finally, the final 4 digits of the phone number are known as the subscriber or local number. Based on the total number of active NPA and NXX combinations reserved and that each one could have up to 10, possible subscriber numbers, the current total possible number of telephone numbers is 1,,, Remember though that phone numbers are no longer just used for standard home phones.
Many telephone numbers are now used for fax machines, cell phones or wireless phones, or internet connections so one person may actually need multiple phone lines. They were created to prepare for a nationwide unified long-distance direct dialing system - the ability to make a call to any other calling area without the need for an operator.
The first digit did not allow a zero could be confused with the operator or a 1 techical reasons. At the time, rotary phones made it so that dialing lower numbers like 1 or 2 took less time to dial and dialing higher numbers took longer to dial.
Area codes with lower numbers that were easier to dial were given to high population and high call volume areas. The original area codes only existed in the US and Canada. Parts of Canada, Alaska, and Hawaii were not yet included.
When the phone formats we commonly use today first came into service in the s and the s, blocks of phone numbers were allocated to a phone carrier in 10, phone numbers ie. Frequently, the 10, numbers would be enough for a small town with larger towns being allocated multiple prefixes. Further, local phone carriers frequently had a monopoly on local phone service which prevented large portions of an allocated block from being unutilized. In the s, cell phones became much more popular which created an explosion of demand for new phone numbers.
Cell phones also reduced the monopoly of local phone providers which reduced utilization of allocated prefixes. Instead of a single primary phone carrier, cities had two or more carriers - each needing their own prefix. In addition, the rise in popularity in the internet dial up and DSL and voice over IP VOIP , local interenet service providers and cable companies started to request prefixes.
Many of these prefixes included few, if any, subscribers. For decades, new area codes were created through a "split" of an existing area code into multiple regions. Normally, the more populated region would continue to use the existing area code. The less populated areas would have all existing phone numbers reassigned to use a new area code to free up more numbers in the original area code. This process forced many into a new phone number which would require updates to letterhead, business cards, phone directories, personal contact lists, etc.
Many people would dial the incorrect area code which caused confusion. In , area code was created as the first "overlay" area code. With an overlay area code, the overlay serves the same geographic as the original to increase the pool of numbers available in the area. When the original phone systems were put in place, 7-digit dialing without the area code could be used to make local calls, and digit dialing with the area code only needed to be used for long distance calls.
In , area code was introduced as the first overlay with forced 10 digit dialing for local calls. Initially, there was substantial public resistance to overlays because of the digit dialing requirement for local calls.
However, the last area code split in Canada was in with the split of splitting off and the last area code split in the US was in with splitting off No area code splits are currently proposed and both countries have agreed: without exceptional circumstances, all new area codes will be overlays.
Today, 7-digit dialing is broken in most major cities. Many areas not served by an overlay can still use 7-digit dialing. Something besides allocating more area codes needed to be done to improve the system. After a few trials, mandatory number pooling was implemented in with a national rollout to the largest metropolitan areas.
Area code was the area code assigned to the entire state of New Jersey in , when the North American area code system was formulated. After splits in , and , it covers the northeasternmost portion of the state, including most of Hudson and Bergen counties, bordering the Hudson River and New York City. Area code is an overlay code to the same numbering plan area that was installed in Area code originally covered the entire state of New Jersey, [2] [1] despite the state's dense population.
The bulk of New Jersey's population is concentrated in the large metropolitan suburbs of New York City in the northeast and the suburbs of Philadelphia in the southwest. The creation of numbering plan areas was based on the anticipated number of central offices needed in each area and one plan area could only accommodate slightly over central offices. In , was restricted to northern New Jersey, while the area from the state capital, Trenton , southward, including the southern Jersey Shore and the New Jersey side of the lower Delaware Valley, received area code As the central region of New Jersey grew during the s, the northeastern section of the state lost sizable portions of its population due to the decline of its major cities, including Newark , Paterson , Clifton , and Elizabeth.
On June 8, , area code was split from ; it primarily serves the north-central regions of the state. Within four years, was close to exhaustion once again due to the proliferation of cell phones , pagers and fax machines.
The supply of numbers was further limited because the entire northern half of the state is a single LATA , meaning numbers in were not available for use. On June 1, , Essex and Passaic counties—respectively home to Newark and Paterson, the state's largest and third-largest cities—as well as Morris and Sussex counties were split off as area code The split was intended as a long-term solution. However, demand for new numbers continued in Hudson and Bergen counties, and it was apparent the area would need another area code.
Verizon , the dominant telephone company in New Jersey, lobbied for an overlay rather than a split.